CareersManual Access
News | Blog

Mepaco Blog

Reliable by Design

Clean-Sweep Surge Loader System Modified for Food Product Flexibility

Clean Sweep Loader System

This surge loader was engineered to accept up to 4000 lbs. of bulk food product with metered delivery to downstream operations. In this design, the hopper is offset from the discharge screw, which allows a “clean sweep” of the agitator against the hopper preventing product bridging. During the FAT (Factory Acceptance Test), 99% of the product was discharged.

The standard Clean-Sweep Surge Loader system was modified to include load cells, contoured auger covers and electropolished internal surfaces. These options provided the customer with efficiencies that met their production goals and floor layout requirements. The system was used to meter IQF (Individual Quick Frozen) meats and vegetables to downstream processes.

The system equipment will be controlled to meter the product depending on the recipe and demand from downstream processes.

The internal surfaces on the surge loader and the dumper were electropolished. The customer made the investment in the highly sanitary finish to increase sanitation efficiencies and to reduce risk of bacterial attachment.

Contoured covers were also used on the auger screw conveyor, which allowed for an increased incline angle and minimized footprint. The contoured covers allow for a full 360 degree wrap around the discharge auger assuring positive product flow.

Safety features include safety grating over the hopper and the discharge auger for safe maintenance and sanitation processes. The discharge auger drive assembly includes a coupler that allows for safe and easy maintenance for gearbox or auger replacement.

Visit Screw Conveyors and Surge Loaders.

Food Product Bulk Dumper Equipment Customized for Extreme Sanitation Protocols

Sanitary Dumper Equipment

Designed and manufactured by Mepaco, this pivot dumper has a high load infeed because of the dump elevation and limited ceiling height available at the customer’s food processing facility. This dumper features a pneumatic combo hold down, with options for additional sanitary surfaces to meet the demands of the caustic and aggressive cleaning procedures.

Due to the high load height, the pneumatic hold-down option allows the customer to use multiple combo/tote sizes in which their IQF (Individual Quick Frozen) products are supplied, without the need for manual adjustment. During the dumping process, the pneumatic hold-down prevents the combo and the liner from falling into the surge loader.

The customer opted for a stainless reservoir tank. Traditionally flat surfaces were redesigned with a pitch to allow water drainage. The top of the reservoir was also pitched to allow drainage.

The application called for all stainless steel piping and non-corroding fittings with a minimum amount of flexible hoses. These upgrades shorten the time to clean equipment between recipe production changes.

All product contact surfaces were electropolished for the greatest resistance to bacterial attachment and the most durable surface for caustic sanitation.

Visit Mepaco’s Dumper Equipment web page for more information and brochure.

Subscribe To Our Blog

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Recent Posts

Read More »