The Mepaco®’s Field Services and Engineering Team have been on hundreds of calls for all types of food processing equipment service. Seal issues are one of the common requests for service. Here’s the top 3 trouble signs for split seal types and how to troubleshoot repair.
The Trouble Signs:
The Possible Problem:
Grooved or Broken Shaft
A worn shaft may cause a loss of vacuum in your equipment. Depending on the space available and the extent of the damage, a worn shaft may be repaired on-site. Ignoring a grooved shaft can lead to a broken shaft resulting in a catastrophic failure. The timeline to order a replacement shaft may take weeks. Even if there is an extra shaft in inventory, there is a minimum of two days of lost production to replace it. If you suspect a grooved shaft, call Mepaco®’s Field Services to troubleshoot the issue.
Worn Seals and Missing Packing
Seals should be checked for wear and sanitized daily. Seals should also be part of your preventative maintenance program, with two to four extra seals in your parts inventory, depending on usage. Changing the seal during scheduled times will help save lost production; instead of shutting down production to replace a seal.
Seals must be correctly installed with recommended packing. Check to make sure that the seal housing is within tolerance. Revisit the documentation for seal installation instructions. If you have new staff, ask for a training session by Mepaco®’s Field Services experts to have them watch and advise on seal installation and maintenance.
Mepaco® equipment features one of three types of seals: Split Seal, Air-Purge Seal, and Mechanical Seal. Each seal is specified for the best use in the type of processing application.
Split Seal: A split seal provides ease of removal and installation. The construction is made up of rubber and metal reinforcement. It can be specified for a variety of applications. It is easy to disassemble for sanitation and holds up to rigorous COP (clean-out-of-place) processes.
Air-purge Seal: These seals are often specified for applications with high food safety risks and abrasive food product situations. The internal components of the seal rotate with the shaft, so there are no typical issues with worn shafts or missing packing. These seals are engineered to reduce maintenance and sanitation costs.
Mechanical Seal: This type of seal is suitable for applications with coarse, gritty food product. These seals are precision-installed and are not forgiving with tolerance. Mechanical seals are engineered for CIP (clean-in-place) sanitation processes.
Contact Mepaco®’s Field Services for answers to your current seal issues, request an audit, or schedule a consultation for a seal solution to fit your application.
In some cases, there is a particular event that causes agitator damage such as a shovel or fork falling into a piece of processing equipment. However, there are several other signs that determine when an agitator is failing:
Here are some causes of agitator damage:
Agitators are part of Mixers, Mixer-Cookers, and ThermaBlend Cookers. This equipment is the most important part of the processing line and must be maintained for maximum uptime. Other equipment, such as Metering Screws with Hoppers have leveling ribbons that may also need to be included in the list for agitator maintenance.
Currently, there is a 3-to-6-month lead time for a new agitator. In some cases, agitator repairs can be made at the customer site. Mepaco Services may be able to use a sleeve or secure welds to get the machine back up and running. Sometimes, it is possible to make repairs for temporary production while the new agitator is put on order.
Contact Parts and Service at 920-356-9900 for more information.
Here's a quick infographic and guide with 7 common parts in food processing equipment that should be in stock for year-end / holiday shut-down maintenance.
1. Motors: Extra motors can prevent unnecessary emergency shut-downs and lost production.
LONG LEAD TIME
2. Agitators: Agitators are custom fabricated to your machine specification, and require longer lead time than typical parts.
3. Cylinders: Make sure you have cylinder back-ups, which can also have long lead times.
4. Safety Switches: Keep extra safety switches in inventory to reduce downtime.
5. Bearings: Mepaco's recommendation for bearings is 1 or 2 back-ups. Check to see if the bearing is a common stock item; if it is not common, plan for longer lead times.
6. Shaft Seals: Plan on 2 - 3 seals per shaft, depending on usage.
7. Gaskets: Gaskets are usually sold in bulk by the foot, check your inventory to make sure you have an ample supply.
If you want to review your parts needs, contact Monica Planasch, Mepaco's Parts Manager, at firstname.lastname@example.org.
Our long time service expert, Greg Ebert, has retired. Greg served Mepaco for over 30 years in a technical support role. We wish Greg a very happy retirement and we thank him for sharing his expertise with our sales, service and engineering team.
Meet our new service tech team who are ready to service your equipment and troubleshooting needs, from left: Bob Dolan, Jacob Jongebloed, Mike Sutton, Ray Henry and Josh Schladweiler.
If you are in need of service, please call your sales representative or call Monica in Parts and Service at 920.356.7347 or 920-344-2085.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.
Your browser does not support iframes.