The Mepaco®’s Field Services and Engineering Team have been on hundreds of calls for all types of food processing equipment service. Seal issues are one of the common requests for service. Here’s the top 3 trouble signs for split seal types and how to troubleshoot repair.
The Trouble Signs:
The Possible Problem:
Grooved or Broken Shaft
A worn shaft may cause a loss of vacuum in your equipment. Depending on the space available and the extent of the damage, a worn shaft may be repaired on-site. Ignoring a grooved shaft can lead to a broken shaft resulting in a catastrophic failure. The timeline to order a replacement shaft may take weeks. Even if there is an extra shaft in inventory, there is a minimum of two days of lost production to replace it. If you suspect a grooved shaft, call Mepaco®’s Field Services to troubleshoot the issue.
Worn Seals and Missing Packing
Seals should be checked for wear and sanitized daily. Seals should also be part of your preventative maintenance program, with two to four extra seals in your parts inventory, depending on usage. Changing the seal during scheduled times will help save lost production; instead of shutting down production to replace a seal.
Seals must be correctly installed with recommended packing. Check to make sure that the seal housing is within tolerance. Revisit the documentation for seal installation instructions. If you have new staff, ask for a training session by Mepaco®’s Field Services experts to have them watch and advise on seal installation and maintenance.
Mepaco® equipment features one of three types of seals: Split Seal, Air-Purge Seal, and Mechanical Seal. Each seal is specified for the best use in the type of processing application.
Split Seal: A split seal provides ease of removal and installation. The construction is made up of rubber and metal reinforcement. It can be specified for a variety of applications. It is easy to disassemble for sanitation and holds up to rigorous COP (clean-out-of-place) processes.
Air-purge Seal: These seals are often specified for applications with high food safety risks and abrasive food product situations. The internal components of the seal rotate with the shaft, so there are no typical issues with worn shafts or missing packing. These seals are engineered to reduce maintenance and sanitation costs.
Mechanical Seal: This type of seal is suitable for applications with coarse, gritty food product. These seals are precision-installed and are not forgiving with tolerance. Mechanical seals are engineered for CIP (clean-in-place) sanitation processes.
Contact Mepaco®’s Field Services for answers to your current seal issues, request an audit, or schedule a consultation for a seal solution to fit your application.
Mepaco's Field Services team have developed a quick-read download on the seal trouble signs that our technicians see in food processing plants. Also Learn about and compare Mepaco recommended seals commonly used on our equipment.
Download the Tech Paper to learn about the Top 3 Seal trouble signs and what to do to fix them:
1. Product escapes or purges out of the seal
2. Downstream food contamination
3. Loss of vacuum
Our techs make hundreds of service calls to troubleshoot and make repairs to seals on all types of food processing equipment and in many applications. If you have any questions or have seal related issues, give Joe Hertel a call in Mepaco Field Services at 920-356-7334.
DOWNLOAD TECH SHEET
Enter your email address to subscribe to this blog and receive notifications of new posts by email.
Your browser does not support iframes.