CareersStore
Pumping | Auger Units

Industrial Food Auger

Mepaco’s industrial food augers and pumping systems eliminate the need for batching by automating product transfers from one point to the next. Stiff, solid products have little or no slump factor can be pumped with Mepaco’s auger feed systems that are customized to the application.

Industrial Food Auger

Optional load cells can be provided to allow pumping systems to operate as “loss-in-weight” metering systems.

Mepaco’s pumping and metering systems are available as single or dual auger feed in a low profile hopper with optional leveling ribbon or breaker assembly.

The leveling assembly prevents product build-up by moving product away from the discharge end and distributing it along the length of the screw augers, permitting optimum use of available hopper capacity. Each auger and leveling ribbon is driven by a flange mounted angled gear motor – no chains or sprockets – for maximum accessibility and sanitation.

Applications for Industrial Food Auger Systems:

  • Course Ground or Emulsified Meats
  • Block, Ground or Processed Cheeses
  • Various types of Dough
  • Butter or Shortening
  • Pastes and pates
  • Mechanically Deboned Meats
  • Pet Food Processing Formulations

 

 

What are the sizes of auger carts?

Mepaco custom designs auger carts from small tabletop solutions to 15,000 pound carts.

Can auger carts have heating or cooling jackets?

ASME thermal jackets are available on pumping systems. In addition, thermal screws are available when the application calls for holding temperature. If your application requires a change in temperature, visit the continuous cooker web page.

What auger sizes and configurations are available?

Common sizes are 9" and 12" diameter, but are available in many sizes depending on the needs of the application. The pitches can be 1 or 2 full pitch, half pitch or variable.

Where do you use augers?

Augers are used effectively to convert a surge on production to a continuous system. Augers used in this manner provide metered flow to convert batch process into a continuous process downstream. They can also be used in automated systems for in-feed applications utilizing controlled metering of ingredients required for the production batch.

Can I put load cells on an auger cart?

Load cells can be used in auger cart systems, if reliable flexibility is designed into the attached pumping and outlet.

When do you need two augers versus one auger?

Two augers are best used in applications where the flow is very high or the product is very dense and viscous.

When do you need a leveling ribbon?

Leveling ribbons are used in applications where the product has a tendency to bridge. Their use keep the augers fully primed and fully distributed throughout the hopper.

My auger-cart cavitates, how can I get a consistent flow?

Cavitation occurs when the pump is not properly primed by the auger(s) that are feeding it. The positive displacement pump is the pacing item for the system; so simply adjust the controls to set the pump for the desired capacity and then dial the augers in to balance the flow.

Once the hopper is empty, how do you get the lines cleaned?

To evacuate the product out of the line, blow the line with compressed air or use a PIG system.