Stainless
Lift EZ4000

The EZ400 is designed with a flat platform, with a rotating top option, and has a working capacity of 4000 lbs.

Specifications:

  • Heavy-Duty T304 Stainless Steel Construction
  • Working Capacity: 4,000-Pounds
  • Platform Size: 48″ x 42″
  • Raised Platform Height: 36″ (Lowered to 9″)
  • Relief Valve to Prevent Overloading
  • Control Valve for Controlled Descent in Case of Electrical Failure
  • Self-Contained Power Unit
  • 115 Volt Single Phase Hydraulic Drive W/Power Unit (Integrally Mounted)
  • Safety Up-Down Pendant Control
  • Dual, Low Pressure Hydraulic Cylinders (SST Powder Coated)
  • Pickle Passivated Finish
  • USDA Approved
https://www.mepaco.net/wp-content/uploads/2023/03/ez.jpg
ez1
ez2

FAQ – STAINLESS LIFT EZ4000

What is the EZ4000 rated for?

4000 lbs.

What maintenance is required for the EZ4000?

Check the cam followers, grease zerks and hydraulics. See manual for maintenance protocol.

What is the loading height?

This lift loads at 9″.

What are the options?

The EZ4000 has an optional rotating top and tilting top. It can be counted on legs/risers. Customized load, height are available.  Stainless steel components (Cylinders, cam followers) are also an option.

What are the safety features?

Optional safety locks stop the lift and hold the lift in a raised position for safe maintenance.

What controls come with the unit?

Standard controls include a hand pendant with option for foot pedal and control button push button station locally mounted (required for 40 volt).

Stainless
Lift EZL2500

The EZL2500 is designed with platform sides, and has a working capacity of 2500 lbs.

Specifications:

  • Heavy-Duty T304 S.S. Construction
  • Working Capacity: 2,500-Pounds
  • Platform Size: 48″ x 42″
  • Raised Platform Height: 37″ (43″ W/Side Rails)
  • Beveled Low-Profile Platform
  • Relief Valve to Prevent Overloading
  • Control Valve for Controlled Descent in Case of Electrical Failure
  • Self-Contained Power Unit
  • 115 Volt Single Phase Hydraulic Drive W/Power Unit (Remotely Mounted)
  • Safety Up-Down Foot Pedal Control
  • Narrow 2.5″ Wide Sides for Easy Loading/Unloading
  • Totally Enclosed Dual (Synchronized) Hydraulic Lift Cylinders
  • Pickle Passivated Finish
  • USDA Approved
https://www.mepaco.net/wp-content/uploads/2023/03/Ergonomic-Lift-EZL2500-Main.jpg
Mepaco Ergonomic Lift EZL2500 127147(1)

FAQ – STAINLESS LIFT EZL2500

What is the EZL2500 rated for?

2500 lbs.

What are the power options?

Standard single phase 115volt or optional 3 phase voltage.

What are the standard control operations?

Foot pedal control; hand pendant or locally mounted push button station are options.

What is the turnaround time on lifts?

The EZL2500 is kept in stock for immediate shipment.

What is the material construction and finish?

The material is T304 stainless steel construction with a pickle passivated finish.

How does it load?

The EZL2500 has a floor level loading that can be loaded by hand truck or fork truck.

What options are available?

Custom higher capacity units, 3 phase power, roll through units (no back) and side guarding.

What are the safety features?

Optional locks hold the lift in a raised position for safe maintenance.

Extremely professional
We were extremely impressed with the amount and quality of work your crew did in a short time. Your crew did a fantastic job of repairs and were extremely professional. I know it was long hours and over the holiday, but you didn’t let up until it was done. It was a monumental task and you hit it out of the park from all aspects. We truly appreciate our partnership.

Michael,
Freshpet